Formation of low-temperature deformation-induced segregations of nickel in Fe–Ni-based austenitic alloys

ABSTRACT

The authors present the results of an investigation in Fe–Ni-Cr austenitic alloys of the low-temperature deformation-induced segregations of nickel that form in the micro regions being (i) located close to grain- and subgrain boundaries and (ii) characteristic of the concentration and magnetic inhomogeneities indicated by the appearance of a dark diffraction contrast at the electron diffraction patterns taken from these regions typical (at the same time) of an enhanced value of Curie temperature. The observed effects were connected with the micro distortions caused by the local change of lattice parameter because of an increase in nickel concentration, as well as in the result of a magnetostriction dilatation. Using methods of the X-ray energy dispersive spectroscopy (XEDS) and atomic-probe body-section radiography (tomography – APT) has made it possible to determine the borders of those regions of austenite that were characteristic of an enhanced concentration of nickel in the fields of the localisation of a deformation-induced segregation of nickel in the vicinity of grain (subgrain) boundaries of austenitic alloys of the types Fe–13Cr–30Ni and Fe–37Ni–3Ti.     

CoFeSiB非晶丝弱磁场测量仪的研制

设计了以Co基非晶丝为敏感元件的传感器探头,多谐振荡励磁电路,信号处理电路,单片机显示电路,且对该磁场测量仪进行了标定。     

非晶态合金薄带与膜的巨磁电阻抗效应理论及计算

通过建立具有平面近横向各向异性场的非晶态合金薄带及膜的磁畴结构模型，利用线性化Maxwell方程组及Landau-Lifshitz方程，推出了在高频交变磁场及外加面内轴向直流磁场H_ex作用下的铁磁材料的与取向相关的磁导率表达式，得到了对方位角平均的相对磁导率及阻抗的计算式，导出了磁导率与张量磁化率分量间的关系，对材料磁导率的实部及虚部随H_ex的变化进行了计算，并给出了对应的磁谱图.建立的磁导率与外磁场的理论关系可将Panina及Kraus给出的理论结果统一起来. 关键词： 非晶态合金薄带及膜 取向相关磁导率 GMI效应理论与计算 近横向各向异性场     

A comparative study of the structure and crystallization of bulk metallic amorphous rod Pr60Ni30Al10 and melt-spun metallic amorphous ribbon Al87Ni10Pr3

Pr-based bulk metallic amorphous （BMA） rods （Pr60Ni30Al10） and Al-based amorphous ribbons （Al87Ni10Pr3） have been prepared by using copper mould casting and single roller melt-spun techniques, respectively. Thermal parameters deduced from differential scanning calorimeter （DSC） indicate that the glass-forming ability （GFA） of Pr60Ni30Al10 BMA rod is far higher than that of Al87Ni10Pr3 ribbon. A comparative study about the differences in structure between the two kinds of glass-forming alloys, superheated viscosity and crystallization are also made. Compared with the amorphous alloy Al87Ni10Pr3, the BMA alloy Pr60Ni30Al10 shows high thermal stability and large viscosity, small diffusivity at the same superheated temperatures. The results of x-Ray diffraction （XRD） and transmission electron microscope （TEM） show the pronounced difference in structure between the two amorphous alloys. Together with crystallization results, the main structure compositions of the amorphous samples are confirmed. It seems that the higher the GFA, the more topological type clusters in the Pr-Ni-Al amorphous alloys, the GFAs of the present glass-forming alloys are closely related to their structures.     

93W合金有关力学参量的综合选评

 对93W合金材料进行了超声测量实验，并结合原有的超声测量结果进行了分析比较，提出了可以直接用冲击波速度关系式的三个系数c₀ 、λ和λ′来对钨合金的有关力学参量，如G₀、K₀、G₀′、K₀′等进行综合选评的方法。得到了一组对93W合金较为合理的力学参量推荐值。     

Chronoamperometric studies in an ammonia citrate electrolyte for the deposition of a nickel-molybdenum alloy

Dependences of the current and the chemical composition of cathodic deposits on the electrolysis time are studied in an ammonia-citrate electrolyte for the deposition of a nickel-molybdenum alloy in potentiostatic conditions. At potentials less negative than ?0.93 V, no nickel-molybdenum alloy deposition occurs and in the course of electrolysis there is observed a decrease in the current, which is connected with the blocking of the electrode surface by the formed molybdenum oxides. In the region of potentials of deposition of a nickel-molybdenum alloy there is realized the following shape of a time dependence of the current. Within the first few seconds of the electrolysis process, the current somewhat decreases. Then there occurs its increase, which is connected with the alloy deposition on the cathode. In the course of electrolysis there occurs a decrease in the molybdenum content in the cathodic deposit.     

a-C:F薄膜的热稳定性与光学带隙的关联

以CF4和C6H6的混合气体作为气源,在微波电子回旋共振化学气相沉积(ECRCVD)装置中制备了氟化非晶碳薄膜(aC:F),并在N2气氛中作了退火处理以考察其热稳定性.通过傅里叶变换红外吸收谱和紫外可见光谱获得了薄膜中CC双键的相对含量和光学带隙,发现膜中CC键含量与光学带隙之间存在着密切的关联,在高微波功率下沉积的氟化非晶碳膜具有低的光学带隙和较好的热稳定性. 关键词： 氟化非晶碳膜 光学带隙 退火温度 热稳定性     

Co-P非晶态合金电子性质和局域结构的理论研究

根据Co P非晶态合金结构的短程有序和结构中可能存在P -P相互作用的实验事实 ,选择了单磷原子簇模型ConP(n =1～ 5 )和双磷原子簇模型ConP2 (n =1～ 4 ) ,用密度泛函理论方法对其进行计算 .结果表明 ,在单磷Co2 P( 2 ) 、Co3 P( 1) 及Co4P( 2 ) 模型体系中 ,Co原子供给P原子电子 ,与电负性规则一致 ,同时Co和P之间具较强化学作用 ,可以形成稳定的原子簇 ;而在双磷和单磷原子簇Co5P( 1) 模型体系中 ,形成的原子簇不稳定 ,采用单磷Co2 P( 2 ) 、Co3 P( 1) 及Co4P( 2 ) 模型能较好地反映Co P非晶态合金的结构特点 .     

Non-isothermal short-range-order kinetics of binary alloys as influenced by solute-vacancy complexes

A model describing the roles of bound and unbound vacancies is proposed in order to predict defect decay and short-range-order kinetics of quenched binary alloys during linear heating experiments. This is an alternative treatment of a previous approach. The model has been applied to the differential scanning calorimetry (DSC) curves of Cu-5 at.% Zn quenched from different temperatures. An expression to calculate the activation energy for migration of solute-vacancy complexes was also developed which make use of DSC trace data. A value of 89.12±0.32 kJ mol^-1 was obtained for the above alloy. The relative contribution of bound and unbound vacancies to partition of effective activation energy corresponding to the ordering process as influenced by quenching temperature was also assessed. This revised version was published online in July 2006 with corrections to the Cover Date.     

非晶金刚石膜的性能及其应用

非品金刚石薄膜具有超高硬度等一系列优异的特殊性能，为工程界孜孜追求的材料表面镀膜。用百纳科技公司研发制造的过滤阴极真空电弧离子镀膜机镀制的非晶金刚石薄膜，SP^3金刚石结构量≥80％，硬度高，膜／基结合力高，摩擦系数小，耐磨损，耐腐蚀，透光率高，在电子，机械，光学，生物医学上有广泛应用前景。我们已在视窗玻璃，丝锥，模具，硬质合金刀头等产品上成功应用。